Use of MAGSAT anomaly data for crustal structure and mineral resources in the US Midcontinent

The analysis and preliminary interpretation of investigator-B MAGSAT data are addressed. The data processing included: (1) removal of spurious data points; (2) statistical smoothing along individual data tracks, to reduce the effect of geomagnetic transient disturbances; (3) comparison of data profiles spatially coincident in track location but acquired at different times; (4) reduction of data by weighted averaging to a grid with 1 deg xl deg latitude/longitude spacing, and with elevations interpolated and weighted to a common datum of 400 km; (5) wavelength filtering; and (6) reduction of the anomaly map to the magnetic pole. Agreement was found between a magnitude data anomaly map and a reduce-to-the-pole map supporting the general assumption that, on a large scale (long wavelength), it is induced crustal magnetization which is responsible for major anamalies. Anomalous features are identified and explanations are suggested with regard to crustal structure, petrologic characteristics, and Curie temperature isotherms

Use of Magsat anomaly data for crustal structure and mineral resources in the US midcontinent

Magnetic profiles on individual satellites tracks were examined to identify bad (nonterrestrially-based) data points r profiles. Anomaly profiles for the same satellite track, but at different passes were compared for parallel tracks and for tracks that cross. The selected and processed data were plotted and contoured to develop a preliminary magnetic anomaly map. The map is similar in general morphology to NASA's Magsat global scalar anomaly map, but has more detail which is related to crustal properties. Efforts have begun to interpret the satellite magnetic anomalies in terms of crustal character. The correlation of magnetics with crustal petrology may have a much larger tectonic implication. Th possibility of there being an ultramafic lower crust along one zone as a consequence of a continental collision/subduction which helped form the midcontinent craton in Precambrian times is being investigated

Use of MAGSAT anomaly data for crustal structure and mineral resources in the US Midcontinent

Personnel matters related to the processing and interpretation of MAGSAT data are reported. Efforts are being initiated to determine the crustal geology, structure, and potential economic consequences to be deduced from the satellite magnetic anomalies in conjuction with correlative data

Use of MAGSAT anomaly data for crustal structure and mineral resources in the US midcontinent

While the preliminary magnetic anomaly map for the centra midcontinent is only in the hand-drawn stage, it agrees in broad aspects with the preliminary global MAGSAT map provided by NASA. Because of data evaluation and finer scale averaging, there are more detailed features which hold promise for eventual geological/crustal interpretation. Some current analysis is directed at examining whether a map data feature such as an elongated anomaly or trend, which seems parallel to satellite data tracks, is likely of crustal origin or is an artifact of the data set

Applications of computer graphics to aircraft synthesis

The history of the development of an aircraft configuration synthesis program using interactive computer graphics was described. A system based on time-sharing was compared to two different concepts based on distributed computing

Use of MAGSAT anomaly data for crustal structure and mineral resources in the US midcontinent

Activities concerning the interpretation of processed MAGSAT data and maps are briefly reported. Work involving the identification of long wavelength 'regional' effects that might be associated with varying crustal thickness or Curie temperature depths is processing

Chemical network problems solved on NASA/Goddard's massively parallel processor computer

The single instruction stream, multiple data stream Massively Parallel Processor (MPP) unit consists of 16,384 bit serial arithmetic processors configured as a 128 x 128 array whose speed can exceed that of current supercomputers (Cyber 205). The applicability of the MPP for solving reaction network problems is presented and discussed, including the mapping of the calculation to the architecture, and CPU timing comparisons

Entangled and disentangled evolution for a single atom in a driven cavity

For an atom in an externally driven cavity, we show that special initial states lead to near-disentangled atom-field evolution, and superpositions of these can lead to near maximally-entangled states. Somewhat counterintutively, we find that (moderate) spontaneous emission in this system actually leads to a transient increase in entanglement beyond the steady-state value. We also show that a particular field correlation function could be used, in an experimental setting, to track the time evolution of this entanglement

Development of a machine protection system for the Superconducting Beam Test Facility at Fermilab

Fermilab's Superconducting RF Beam Test Facility currently under construction will produce electron beams capable of damaging the acceleration structures and the beam line vacuum chambers in the event of an aberrant accelerator pulse. The accelerator is being designed with the capability to operate with up to 3000 bunches per macro-pulse, 5Hz repetition rate and 1.5 GeV beam energy. It will be able to sustain an average beam power of 72 KW at the bunch charge of 3.2 nC. Operation at full intensity will deposit enough energy in niobium material to approach the melting point of 2500 {\deg}C. In the early phase with only 3 cryomodules installed the facility will be capable of generating electron beam energies of 810 MeV and an average beam power that approaches 40 KW. In either case a robust Machine Protection System (MPS) is required to mitigate effects due to such large damage potentials. This paper will describe the MPS system being developed, the system requirements and the controls issues under consideration.Comment: 3 pp. 13th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS 2011). 10-14 Oct 2011. Grenoble, Franc

Accelerating the transition to heat pumps: measuring real-world performance and enabling peer-to-peer learning - An Energy Futures Lab Briefing Paper

Major challenges exist for decarbonising heat in buildings through mass adoption of heat pumps. These include consumer uncertainty and gaps in evidence, data and installer skills. This Energy Futures Lab briefing paper explores in detail the potential impacts and feasibility of one approach to supporting the transition: leveraging early adopters by measuring in-situ heat pump installation outcomes and sharing these as case studies to enable peer-to-peer learning among consumers and installers. Topics discussed include: the role of advice and support in the heat pump adoption customer journey; methods of assessing heat pump and building performance; stakeholder benefits from sharing data; and the context for implementing these recommendations